SP CONNECT Bike Bundle II Universal Clamp

Product Information

Remember I said how I’d dropped my phone off the bike? It was mounted to the S1000XR I owned then – so about a meter and a half off the ground – and while riding at a good 60mph the phone was suddenly waving in front of me, attached to the USB cable that was charging it. Before I could react, it disappeared behind me and bounced down the road. At SP Connect, we are proud to offer high-quality print-on-demand services to our customers. However, we are also responsible for ensuring that the content we produce is in line with our values and legal standards. We appreciate your understanding and assistance in helping us to maintain these standards. So we ask all of our customers to comply with this disclaimer when using our services.

While new new SP Connect SPC+ system can be a little more fiddly to mount than the previous vesion, it is much more secure. The SP Connect Charging Anti Vibration Module includes the company’s vibration damping system (details below), and is made from machined aluminium that’s well sealed against the weather.Wireless charging works fine with the new cases, and the MagSafe compatibility means a suitable charger can snap into place, rather than having to hunt around for the sweet spot. I should say though that performance might depend on your phone – my Galaxy S21 will easily juice up wirelessly with its case on – even with a cheap charger I bought from the Pound Shop – but my Pixel 7 Pro seems to be very unreliable with wireless charging. This is a fault of the Google device though, not SP Connect, and problems appear well documented online . The quality of the image provided by the customer must meet print standards to ensure a high-quality final product. You will be alerted if the quality is insufficient. The new case design is noticeably slimmer, and comparing the Samsung Galaxy S21 SPC case with the new SPC+, it’s obvious how much more compact it is. I really can’t stress enough just how much slimmer the SP Connect SPC+ case feels, and I should point out too that the buttons are very easy to press still, thanks to slots cut around them that help them move easily – a pricey ZAGG case I had before was much more intrusive thanks to a less considered design.

No, a pattern cannot be discerned. The reported cases were a broad mix of makes and models – models that occurred more frequently corresponded to the quantity of respective motorbikes on the market. Furthermore, there is no difference between the type of engine.A significant difference between most Samsung and Apple devices is that the OIS in Samsung devices is deactivated when the camera is not being used, whereas the OIS in Apple devices is always activated. This is all the damage sustained after my phone bounced down the road at 60mph in an SP Connect case Mous has also developed a range of motorcycle mounts to suit its cases, though options are rather limited for now, and prices seem to be on the high side.

Peak Design has a small selection of motorcycle mounts for its range of phone cases, though some of the prices are quite high. After using SP Connect for almost four years on a very wide variety of bikes, the only time I had an issue was after mounting my Galaxy S20 directly to the bars of a Kawasaki W800 using the Universal Mount. When I stopped to take a picture, the camera was shaking continuously and couldn’t settle but after restarting the phone it was cured. The vibrations from the motorcycle engine cause the impairment – the vibrations from the road are not an issue as they are too volatile.Disappointingly, the SP Connect Charging Suction Mount does not come with a USB adaptor. As many cars now have USB outlets, I guess it’s not an issue for a lot of people, but do budget for a good-quality QC 3.0 one if you have an older motor like me. As before, you can use a standard wireless charger with the SP Connect phone cases, but MagSafe compatibility is now standard too. Based purely on anecdotal evidence, I’ve long had a theory that it’s mainly Apple devices that have a problem with vibration on bikes, but when I bought my Pixel 7 Pro I was worried about the telephoto lens, which rattles when you shake it. I’m pleased to say though that after several months on my R1250GS (using the Anti-Vibration Charging Mount), I’ve had no problems at all, and my S21 (and previous S20) were mounted direct to various bikes without any issue other than that day on a W800. When fitting you’ll need to decide whether you want to have your phone in a horizontal or vertical position, as apart from on the universal mount, you can’t change it without unscrewing it due to the way the phone attaches with a 90° twist. Most of the mounts have adjustment in 6° increments, so you should be able to get your phone to sit straight to most parts of the bike. With two different length straps and a very effective grip thanks to a silicone band bonded to the rear of the straps, the Universal Mount could be ideal for swapping between motorcycles, and for using on the push-bike – it’ll fit on anything between 20mm and 90mm in diameter, so there’s plenty of versatility.